§ 145.61. Insignia of inspection agencies.

 (a)  The inspection agency shall attach its label, seal or other insignia to the data plate for each industrialized housing module.

 (b)  The inspection agency shall attach its label, seal or other insignia or other identification to each housing component which is transported to the building site for installation in a housing structure and to each separate element, if any, of the housing component which is transported to the building site for assembly and installation.

 (c)  The label, seal or other insignia of the inspection agency must identify the name and address of the inspection agency and have a serial number. In other respects, the inspection agency may design its label, seal or other insignia as it wishes, provided that the label, seal or other insignia does not contain statements which the Department determines are inconsistent with the act or this chapter. Each label, seal or other insignia must be attached in a clearly visible location to the housing component or element of the industrialized housing or housing component, as applicable, by the time of its arrival at the building site, but the label, seal or other insignia may be covered up during the process of assembly and installation at the building site so that it is not permanently visible.

   The provisions of this §  145.61 adopted July 12, 1974, effective July 13, 1974, 4 Pa.B. 1403; amended September 8, 1978, effective March 9, 1979, 8 Pa.B. 2524; corrected September 22, 1978, effective March 9, 1979, 8 Pa.B. 2631; amended November 5, 2004, effective February 4, 2005, 34 Pa.B. 6024; effective date corrected at 34 Pa.B. 6133. Immediately preceding text appears at serial pages (231140) to (231141).

   This section cited in 12 Pa. Code §  145.62 (relating to data plates).