§ 13.37. Stamping and marking.

 (a)  Each tank to be used for liquefied petroleum gas, hereafter constructed and installed, shall be stamped with the ASME symbol and marked as required by §  3.144 (relating to marking). In addition, the water capacity of the tank shall be marked in pounds or gallons (U.S. Standard), and the overall length and diameter of the vessel shall also be placed on the tank.

 (b)  Tanks used in storing, handling or transporting liquefied petroleum gas in industrial establishments shall be clearly marked on their outer surface with the type of liquefied petroleum gas which they contain.

Cross References

   This section cited in 34 Pa. Code §  3.12 (relating to frequency of inspection); and 34 Pa. Code §  13.4 (relating to scope).


No part of the information on this site may be reproduced for profit or sold for profit.

This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.