§ 403.26. Swimming pools.

 (a)  A swimming pool, hot tub and spa which is accessory to a one- or two-family dwelling shall comply with all of the following:

   (1)  Chapter 41 of the ‘‘International Residential Code.’’

   (2)  Appendix G of the ‘‘International Residential Code.’’

   (3)  Section 2406.2, paragraph 9 of the International Building Code (glazing in walls and fences enclosing indoor and outdoor swimming pools, hot tubs and spas).

   (4)  Section 3109.4 of the ‘‘International Building Code’’ (residential swimming pool enclosures).

 (b)  A swimming pool that is not accessory to a one- or two-family dwelling must comply with this chapter, the ‘‘American National Standards for Public Pools’’ issued by ANSI and APSP (ANSI/NSPI-1 2003) and the Public Bathing Law (35 P. S. § §  672—680d).

 (c)  A hot tub or spa that is not accessory to a one- or two-family dwelling must comply with this chapter and the ‘‘American National Standard for Public Spas’’ issued by ANSI and APSP (ANSI/NSPI-2 1999).

Authority

   The provisions of this §  403.26 amended under section 301 of the Pennsylvania Construction Code (35 P. S. §  7210.301).

Source

   The provisions of this §  403.26 amended December 15, 2006, effective December 31, 2006, 36 Pa.B. 7548. Immediately preceding text appears at serial page (306384).



No part of the information on this site may be reproduced for profit or sold for profit.

This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.