§ 37.58. Seal.

 (a)  A registrant shall obtain, at the registrant’s own expense, a seal in the identical design authorized by the Board. The following are Board authorized seals for ‘‘Registered Professional Engineer’’ (Design A), ‘‘Registered Professional Land Surveyor’’ (Design B) and ‘‘Registered Professional Geologist’’ (Design C):

 

 (b)  The seal shall contain the legend ‘‘Registered Professional Engineer,’’ ‘‘Registered Professional Land Surveyor’’ or ‘‘Registered Professional Geologist’’ and the registrant’s name and registration number together with a reference to the Commonwealth of Pennsylvania.

 (c)  The seal shall be 1 3/4 inch in diameter. The diameter of a pocket seal may be reduced to 1 1/2 inch if the design is in the same relative proportions in subsection (a).

 (d)  A registrant may use a metal seal, rubber stamp, computer image which is a facsimile of the seal or digital seal, if the registrant first obtains a seal in accordance with this section.

Authority

   The provisions of this section amended under sections 4(l) and 7 of the Engineer, Land Surveyor and Geologist Registration Law (63 P.S. § §  151(1) and 154).

Source

   The provisions of this §  37.58 adopted January 21, 1994, effective January 22, 1994, 24 Pa.B. 518; amended October 25, 1996, effective October 26, 1996, 26 Pa.B. 5106; amended December 16, 2022, effective December 17, 2022, 52 Pa.B. 7709. Immediately preceding text appears at serial page (407619).

Cross References

   This section cited in 49 Pa. Code §  37.56a (relating to definitions); and 49 Pa. Code §  37.20a (relating to provisional endorsement license).

---

No part of the information on this site may be reproduced for profit or sold for profit.

This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.